LED Strip Connectors - 5 Pack for Single Color LED Strips

Why do you need this LED tape light connector? The traditional strip light connector design structure makes it not very reliable, as it is easy to cause the light to flash or turn off with a small movement, break up the strip light, and require the purchase of LED wire alone, etc. All of these factors make them unsuitable for home users.

The MSDUSA-designed LED light strip connectors solve these problems, making them easy for end consumers, electricians, or DIY enthusiasts to use. Before buying this LED connector, check the width of your LED strip light PCB and the waterproof rating. This connector is only suitable for 10mm width SMD2835/5050/3014/5060 LED strip lights and 8mm/10mm width COB LED strip lights. It is also only suitable for IP20/IP44 non-waterproof and IP65 silicone-glued waterproof LED strip lights. It is not suitable for 8mm width SMD2835/5050 RGB color-changeable LED strip lights.

How to use this 10mm 2-PIN LED connector to connect the LED strip with a wire to the driver: 1. Cut off the LED strip light from one roll. 2. Remove the 5mm-long 3M tape on the back of the strip light. 3. Plug in the LED strip light and screw it down, ensuring it is tight. 4. Plug in the household cable or LED wire and screw it down, paying attention to the + and - polarity. 5. Power on the LED driver to check if the light turns on (if not, screw down the screws more). 6. Secure this LED connector with 3M tape on the bottom. 7. Optionally, secure this LED connector with a screw through the hole. 8. Put the protective cover on (to avoid touch by children).

To connect strip light to strip light (suitable for corners or long-distance connections): 1. Plug in the LED strip lights and screw them down (both). 2. Plug in the wire at both connectors, then screw them down.

Electrical parameters: Working Voltage: 5 - 24VDC Max Amperage: 5V-4A, 12V - 6A, 24V - 6A Input Wire Range: 14AWG-22AWG, Max 2.2mm diameter (inner single wire)

Included Accessories: 3M adhesive tape and fixing screws

Working Environment: Indoor Ambient Temperature: -4°F to 122°F (-20°C to 50°C)

Material: Polycarbonate Color: Transparent

Key Features: High Reliability: Moving the LED strip light or LED strip light connectors will not cause the light to flash or turn off, making it suitable for fish houses and boats. High Applicability: Suitable for both IP20/IP44 non-waterproof and IP65 silicone-glued waterproof LED strip lights. Broad Access: 14AWG, 16AWG, 18AWG, 20AWG, 22AWG, 2-PIN white/black AC wire, and 3-PIN AC wire can all be plugged into this 2-PIN LED strip connector. Copper Contacts Shrapnel: Supports a large current of up to 6A (24V) input, connecting the LED strip light wire without voltage drop, allowing the LED driver to be placed away from the strip light. Two-Way Fixing: Screw down the block from the hole or use 3M tape on the bottom to attach it to the wall.

product information: